Bite Me white Sleeves-Ready to Press Transfer

Heat press is recommended to achieve the amount of pressure needed for the transfers!!

DTF Transfer Pressing Instructions

1. Set Heat Press: Preheat to 325°F with medium-firm pressure.
2. Pre-Press Garment: Press for 5 seconds to remove wrinkles and moisture.
3. Position Transfer: Place the transfer design-side down on the garment.
4. Press Transfer: Press for 15 seconds at 325°F.
5. Peel Film: Let the transfer cool completely (cold peel) before removing the film.
6. Final Press (Optional): Cover with parchment paper and press for 5–10 seconds for a smooth finish.

You're done!

DTF Transfer Care Instructions

1. Wait 24 hours before washing.
2. Wash inside out in cold water on a gentle cycle.
3. Use mild detergent (no bleach or fabric softeners).
4. Air dry or tumble dry on low heat.
5. Do not iron directly on the design.
6. Avoid high heat or dry cleaning.

Keep your design looking great by following these simple steps!

TAT is 1-3 business days. This does not include weekends or holidays and is subject to change due to volume of sales, but we do our very best to stay within timeframe.

Image Requirements
- We recommend images to be in PNG format. At least 300 DPI
-Files must be print ready
- Background must be removed before sending artwork

Color Disclaimer
Actual colors may vary. This is due to the fact that every computer monitor/phone screen has a different capability to display colors and that everyone sees these colors differently. Please understand the actual color may vary slightly from your monitor.